Advantages
REACH AZP-908 is an activated AZG superfine powder, and is very popular in this product form. It provides clinical strength protection against wetness and odor.
Procedure
- Combine Phase A, B and C and heat to 85°C or until clear. Cool to 70°C.
- Separately heat Phase D to 70°C and add to step 1.
- At 70°C add Phase E and F while mixing
- Add Phase G and mix well. Cool to 40°C and transfer to Hobart mixer pot.
- Add Phase H slowly while mixing. Add Phase I.
- Mix for 15 minutes at low speed, then at moderate speed for 15 minutes.
| Ingredient | Supplier | %w/w |
|---|---|---|
| Hydrogenated Castor Oil (Castor Wax MP80) | Caschem | 2.60 |
| Ingredient | Supplier | %w/w |
|---|---|---|
| Polydecene (Silkflo 364 NF) | Lipo | 9.00 |
| Ingredient | Supplier | %w/w |
|---|---|---|
| PPG-14 Butyl Ether (Fluid AP) | Amerchol | 9.00 |
| Ingredient | Supplier | %w/w |
|---|---|---|
| Cyclomethicone (DC 245 Fluid) | Dow Corning | 44.90 |
| Ingredient | Supplier | %w/w |
|---|---|---|
| Talc 5351L (Whittaker) | Whittaker, Clark & Daniels | 6.00 |
| Ingredient | Supplier | %w/w |
|---|---|---|
| Enhance Efficacy Aluminum Zirconium Tetrachlorohydrate GLY Superfine Powder (REACH AZP-908) | Elementis | 22.00 |
| Ingredient | Supplier | %w/w |
|---|---|---|
| Cyclomethicone (and) Dimethicone Crosspolymer 8DC 9040 Silicone Gel) | Dow Corning | 1.70 |
| Ingredient | Supplier | %w/w |
|---|---|---|
| Fumed Silica (Cab-O-Sil M5) | Cabot | 4.30 |
| Ingredient | Supplier | %w/w |
|---|---|---|
| Fragrance | 0.50 |
